This website uses cookies, and the limited processing of your personal data to function. By using the site you are agreeing to this as outlined in our Privacy Policy.

Edit

Metabolomics Core Facility

This facility provides services for analysis of metabolites and lipids.

Guide to sample cleanup and storage

General minimum amount of material required

  • Cell culture: 1-2 million cells
  • Microbial pellet: 5-25 mg
  • Tissue: 5-25 mg
  • Biofluids (plasma/ serum and urine): 50 μL

Recommended extraction solvents

  • Metabolites: methanol, acetonitrile, water
  • Lipids: methanol, isopropanol, MTBE

Please refer to our protocols for sample preparation for details.

Caution:

  • Use only LC/MS-grade solvents, additives, buffers and MilliQ nanopure water
  • Avoid contact with any plastic material during lipid extractions. Use glassware and glass syringes during lipid extraction.
  • The following plasticware can be used if required:
    • Eppendorf Safe-Lock Tubes, 2.0 mL (Part number 0030120094)
    • Eppendorf Safe-Lock Tubes, 1.5 mL (Part number 0030120086)
    • Eppendorf® twin-tec PCR plates 96 eppendorf (Part number Z651486)
  • Use clean containers, sample tubes, Eppendorf tubes for sample processing and storage
  • Avoid glassware that has been cleaned with detergent e.g. from the EMBL kitchen, or clean them several times with MilliQ water and MS-grade organic solvents prior to usage.

Samples can be submitted as:

  • Dried extracts obtained using speedvac / under nitrogen (preferred at cool conditions or room temperature)
  • Aqueous methanolic extracts
  • For outstations: please ship samples in sufficient dry ice.

Recommended reconstitution solvents

  • Water (50─80%)
  • Aqueous methanol/acetonitrile (20─80%)
  • Isopropanol
  • Methanol (caution: volume changes due to solvent evaporation at room temperature)
  • Minimum reconstitution volume 50-100 μl

Quality control

  • Do include pooled QC samples with each batch of samples for bracketing during analysis.
  • Internal standards spiking during sample preparation: Deuterated or 13C internal standards are an ideal choice.
  • Prepare replicates, preferentially biological and preparation replicates

Note: Please consult with MCF staff for the appropriate selection of the replicates, quality control samples, and internal standards that are suitable for your desired LC-MS analysis.

Before sample submission, make sure that:

  • extracts are completely soluble reconstitution solvents
  • samples are centrifuged above 10,000 g
  • there is no insoluble matter in samples
  • extracts are filtered if necessary (make sure to wash filters prior to usage, as some filter membranes contain stabilizing reagents)

Storage

  • Dried metabolite extracts should be stored at -80°C (optional filling with argon/nitrogen would help to prevent oxidation)
  • During processing, samples should be kept on ice
  • Pack samples in dry ice for shipment times of more than 1 hour
  • Samples will be kept at 4°C during LC-MS analysis
Edit